Stereo 40 MkIII 2A3

Stereo 40 MkIII 2A3 (NUEVO!)

Integrated Pure Triode 2A3 amplifier 18×18 Triodo 9x9W

Descripción:
• Comprehensive manual supplied
• Full instructions for valve change included
• All hand wired point to point
• No printed circuit or tag board to ‘colour’ sound
• Japanese Blue ALPS volume pot.
• Class A, all Triode front end
• Output circuit all pure Triode
• 4x 2A3 precisely matched for best performance
• 1x 6SL7 first stage valve, 2x 6SN7 phase splitter
• 274B valve rectifier for ‘Soft start’ and smooth sound
• No global feedback used (integrated operation)
• Standby switch to save valve life and power
• 2x 17 Watts RMS in Triode mode
• Signal to noise level -90db
• Freq response better than 20hz-20kHz ±1db
• Power bandwidth 10hz-30khz -3db
• Total harmonic distortion 0.10% at 10 watts
• Suitable for 3 to 16ohm loudspeakers
• Supplied with attractive safety guard.
• Audiophile quality metal film resistors
• Rubicon/Nichichron power caps.
• Blue LED mains indicator
• Valve rectifier
• Choke regulated power supply
• Audiophile quality polypropylene audio caps.
• Silver TEFLON audio cable
• 99.9999% pure copper
• High grade transformer iron
• Custom hand wound Tertiary output transformers
• Ceramic valve holders for minimum noise/leakage
• Centre tapped heater circuit for minimum hum
• Gold plated Input & speaker terminals
• Four line inputs – CD, Tape, Tuner, Aux
• Tape monitor circuit with ‘Record Out’
• 250mv input sensitivity for full output.
• 230/240volts 76w SB, 140w Min, 240watts max.
• 1.6A AS rear fuse
• CE, ROHSS and WEEE where applicable.
• 390mmW, 410D, 210H, 25kg (a minimum of 30mm height should be added to allow for ventilation)

Buscar

Partners